# AI voice agent CRM integration in 2027: every call in your help desk

> AI voice agent CRM integration sends every phone call to your help desk or CRM. Each call arrives with a short summary and the full transcript. During the call, the agent can look up orders and accounts in your own systems.

- URL: https://hail.so/blog/ai-voice-agent-crm-integration
- Type: Guide
- Tags: voice-agent, inbound, contact-center
- Published: 2026-11-18
- Reading time: 12 min

Your support team should see every phone call, not only the calls a person took. This guide shows how an AI phone agent puts each call in your help desk or CRM. It also shows how the agent checks an order or an account while the caller waits.

To create the agent first, open the [setup guide](https://hail.so/create-ai-agent).

## What is AI voice agent CRM integration?

AI voice agent CRM integration connects the agent that answers your phone to the tools your team already uses. It works in two directions:

- **After the call.** About 10 seconds after a call ends, Hail sends its summary and transcript to your server. Your server adds the call to your help desk or CRM.
- **During the call.** The agent asks your own systems for a fact, such as an order status. Then it tells the caller the answer.

A few words you will see in this guide:

- **Help desk.** The tool your support team uses to track customer questions.
- **Ticket.** One customer request in your help desk. Your team works on it until it is solved.
- **CRM.** Short for customer relationship management. It keeps a record of each customer and every contact with them.
- **Transcript.** A written copy of every word said on the call.

## Why every call belongs in your help desk

Phone calls often get lost. A person takes notes, or nobody does. With the integration, each call becomes a record your whole team can read.

- **One place for every request.** Calls sit next to emails and chats in your help desk. Nobody keeps a second list.
- **No repeated questions.** The next person reads the summary first. The caller does not explain the problem twice.
- **Night calls wait for the morning team.** A call at 2 AM is a ticket at 9 AM, with the details already written.
- **Real numbers.** Your reports count phone requests too, not only email.
- **Fast checks.** A manager reads a two line summary instead of playing a recording.

When one agent answers both your calls and texts, it remembers earlier calls and texts from the same number. A caller who texts first and calls later does not start over.

## What your help desk or CRM gets after each call

Hail sends one message for each call, about 10 seconds after the call ends. It holds these details:

| Detail | Example | What your team does with it |
| --- | --- | --- |
| Summary | "The caller asked where order HL-4821 is. The agent said it ships Thursday." | Reads the call in a few seconds |
| Transcript | Every turn, with who spoke and when | Checks the exact words when it matters |
| From number | +1 555-0142 | On an incoming call, finds the customer record |
| To number | +1 555-0100 | On an incoming call, shows which line got the call |
| Direction | Inbound or outbound | On an outgoing call, the customer is the "to" number |
| Length | 74 seconds | Spots long or very short calls |
| How the call ended | Normal hang up, or an error after someone spoke | Finds calls that broke off |
| Agent | The saved agent that answered | Knows which instructions were used |

A call where nobody spoke sends no message. If Hail cannot write the summary, the transcript still arrives without one.

## How an AI agent creates support tickets from calls

Your server receives each finished call and decides what to do with it. A common setup looks like this:

```flow
A customer calls your support number
The AI agent answers and helps the caller
The call ends
About 10 seconds later, Hail sends the summary and transcript to your server
Your server finds a likely customer by phone number | No match: your server adds a new contact
Your server opens a ticket with the summary and adds the transcript
Your team reads the ticket and follows up
```

You choose the rules. For example, an upset caller can open an urgent ticket. An order question can add a note to the customer record instead.

If the agent cannot help, it passes the live call to a person on your team. Read the [warm transfer guide](https://hail.so/blog/warm-transfer) to set this up.

## Look up orders, accounts, and serial numbers during the call

The agent can ask your own systems for facts while the caller is on the line. You give it up to 10 lookups. Each lookup is a web address on your server that answers one kind of question.

Say you run Harbor Lane Bikes, a made-up bike shop. Your agent could handle these calls:

| Caller asks | The lookup | The agent says |
| --- | --- | --- |
| "Where is my order?" | Order status by order number | "Order HL-4821 shipped on Monday. It should arrive Thursday." |
| "Is my bike still under warranty?" | Warranty by serial number | "Yes. Your warranty runs until March 2028." |
| "What plan am I on?" | Account by email address, checked on your server | "You are on the yearly service plan." |
| "Did you get my return?" | Return status by order number | "Yes. We got it on Friday. Your refund is on its way." |

While a lookup runs, the agent says a short line, such as "One moment, let me check." Each lookup waits 5 seconds by default, and up to 10 if you choose. If your system does not answer in time, the agent says it could not check, and the call goes on.

The same lookups work when customers text or email the agent. So every channel gives the same answer.

## How to connect an AI voice agent to your help desk or CRM

The integration has two parts: a message after each call, and lookups during the call. Follow these steps:

1. List your five most common support calls. Write down the facts the agent needs for each one.
2. Create your agent in the console. Start from the [customer support template](https://hail.so/agent-templates/customer-support). You can also ask your AI assistant to create it over [Hail MCP](https://hail.so/mcp).
3. Ask your developer to add one web address that receives each finished call. It opens a ticket in your help desk or CRM.
4. Ask them to add one lookup for each fact, such as order status or warranty.
5. Add a line to the agent's instructions for each lookup. Copy the template below.
6. Make five test calls. Check that each one opens a ticket on the right customer.
7. Route your support number to the agent.

Your developer can find the technical steps at the [end of this guide](#set-it-up-yourself).

## Instructions template for lookups

Paste this into the agent's instructions. Replace the parts in brackets. The lookup names must match the names your developer gave them:

```prompt
You answer support calls for [business name].
When a caller asks where an order is, ask for the order number. Then use lookup_order.
When a caller asks about a warranty, ask for the serial number on the [product]. Then use check_warranty.
Before you share account details, ask the caller to confirm their [postal code or email address].
Read each result in one or two short sentences.
If a lookup fails, say you could not check right now. Offer a callback.
If the caller wants a refund or is upset, pass the call to a person.
Never guess an order status, a date, or a price.
```

## AI call summary: what your team reads first

Hail writes the summary from the transcript after the call ends. It says in two or three sentences why the person called, what was agreed, and any next step. It is written in the language of the call.

Put the summary at the top of the ticket. Add the full transcript below it, or as a file. Your team reads the summary first and opens the transcript only when the details matter.

A good ticket from a phone call holds:

- the summary, as the first lines of the ticket;
- the caller's number, linked to the customer record;
- the order or serial number the caller gave;
- the full transcript, below the summary or as a file.

## Checklist before you go live

Test these with real calls before you send your support line to the agent:

- [ ] Each test call opens one ticket, not two.
- [ ] An incoming call's ticket is attached to the caller's number. An outgoing call's ticket is attached to the number you called.
- [ ] Your server treats the phone number as a hint, not proof of who called.
- [ ] A caller with no record gets a new contact, not an error.
- [ ] Each lookup answers in under 5 seconds.
- [ ] The agent asks for a second detail before it reads out account facts.
- [ ] Your server checks the second detail before it returns account facts.
- [ ] A failed lookup ends with a polite line and a callback offer.
- [ ] A call passed to a person still opens a ticket.
- [ ] Your team knows where phone tickets appear and who owns them.

## Set it up yourself: webhooks and custom tools
This part is for the person who connects your systems. It has two pieces. Full details are in the [webhooks docs](https://hail.so/docs/webhooks) and the [agents docs](https://hail.so/docs/agents).

**Get each call when it ends.** A webhook is a message Hail sends to your server when something happens.

1. In the console, open **Webhooks**.
2. Enter your HTTPS address in **Target URL**.
3. Under **Events**, tick **Call transcript and summary** (`call.summarized`). Untick any other event.
4. Click **+ Create subscription**. Copy the signing secret: it is shown only once.

Your server checks the `X-Hail-Signature` header with that secret. Then it opens the ticket. Hail sends calls that end after you create the subscription. Editing the subscription, **Rotate secret**, or **Resume** moves that start point. Hail drops a call that is not sent within 24 hours after it ends. When the summary fails, `summary` is `null`, so handle that case. If your server fails, Hail tries again with the same `X-Hail-Delivery` id, so use it to skip copies.

**Let the agent call your API.** A custom tool is a web address on your server that the agent calls during a call. Hail calls these HTTP tools. You can add them with [Hail MCP](https://hail.so/mcp) from an AI assistant such as Claude or ChatGPT. Ask it:

```prompt
Add an HTTP tool called lookup_order to my support agent.
Keep the agent's other HTTP tools.
It sends the order number to https://api.example.com/hail/orders.
Use the wait message "One moment, let me check."
```

On the agent's first HTTP tool, the assistant may show the tool secret in the chat. If it does, make a new one that was never in a chat. Ask the assistant for the agent id, and set `AGENT_ID` to it. Set `HAIL_API_KEY` to a key from **API keys** in the console. Then send this request:

```bash
curl -X POST "https://api.hail.so/v1/agents/$AGENT_ID/rotate-tool-secret" \
  -H "Authorization: Bearer $HAIL_API_KEY"
```

The response holds the new `http_tool_secret`. Store it in your own secret store. The old secret stops at once for new calls, texts, and emails. A call already in progress keeps its old secret until it ends. So after you rotate, accept both secrets for at least an hour, or longer if your calls run longer.

To save the tool with the API instead of MCP (optional), send this request. It replaces the agent's full HTTP tool list, so include every HTTP tool:

```bash
curl -X PATCH "https://api.hail.so/v1/agents/$AGENT_ID" \
  -H "Authorization: Bearer $HAIL_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "http_tools": [{
      "name": "lookup_order",
      "description": "Look up an order by its number.",
      "url": "https://api.example.com/hail/orders",
      "parameters": {
        "type": "object",
        "properties": {"order_number": {"type": "string"}},
        "required": ["order_number"]
      },
      "timeout_seconds": 5,
      "wait_message": "One moment, let me check."
    }]
  }'
```

Hail signs each tool request with the agent's tool secret, the same way as a webhook. The first save with HTTP tools returns it once as `http_tool_secret`. The rotate request above makes a new one. Your server answers with JSON or plain text. The agent reads up to 4,000 characters of it.

Each tool request names the call, text, or email it belongs to: `call_id`, `sms_id`, or `email_id`. With your Hail API key, your server can read that record: `GET /v1/calls/{id}`, `GET /v1/sms/{id}`, or `GET /v1/emails/{id}`. Trust that record more than the tool arguments, because a caller can talk the agent into passing a different number. But caller ID and email senders can be faked too. In the call record, `from_e164` is the caller and `to_e164` is the number called. On an outgoing call, the customer is `to_e164`. Call webhooks, such as `call.summarized`, name the same numbers `from` and `to`. Always confirm a second detail, such as an email address, before you read out account data.

## AI voice agent CRM integration FAQ

### Does Hail connect to my help desk or CRM by itself?

No. Hail sends each finished call to your server, and your server adds it to your help desk or CRM. Direct integrations with common tools are coming.

### Does every call get a summary and transcript?

Sometimes. Every call where someone spoke gets a transcript. If the summary step fails, the transcript still arrives without a summary. Hail sends only calls that end after you create the subscription. Editing it, **Rotate secret**, or **Resume** moves that start point. Hail drops a call that is not sent within 24 hours after it ends.

### Can the agent look up customer data during the call?

Yes. You give the agent up to 10 lookups on your own server. It calls them during the call and tells the caller the answer.

### Can the agent change a record during the call?

Yes. A lookup can do any action your API allows, such as opening a ticket. Check for copies on your side, because a request can be sent twice.

### What happens if my system is slow or down?

The call goes on. Each lookup waits 5 seconds by default, or up to 10 if you choose. Then the agent says it could not check. Write your instructions so it offers a callback.

### Do the lookups work for texts and email too?

Yes. The same lookups work when the agent answers texts and email. The wait line is only spoken on calls.

### Can I check that a request really came from Hail?

Yes. Each webhook and lookup request carries a signature in the `X-Hail-Signature` header. Check webhooks with the webhook signing secret, and lookups with the agent's tool secret.

### Does this work with an AI receptionist?

Yes. An AI receptionist is an AI phone agent at your front desk, so the same setup works. Read the [AI receptionist guide](https://hail.so/blog/ai-receptionist) to compare options.

For call prices, read the [pricing page](https://hail.so/pricing). For the bigger picture, read the [AI phone agent guide](https://hail.so/blog/ai-phone-agent).
